Contact us Donate
EN FR
The LOUTCH kit

A corrective eyewear kit to equip 500 children.

Two cases, 500 frames, 1,600 lenses and an assembly jig: enough to fit 500 people on site, with no lab, in 15 to 30 minutes per person.

The two LOUTCH cases stacked and closed on the beach at Mar Lodj
1 · The frame

Made-to-measure
glasses

A modular, screwless frame, assembled on site with the person's own lenses.

A pair of LOUTCH glasses on a desk in a classroom
In Mar Lodj, a LOUTCH frame is assembled on the engraved wooden jig
In Mar Lodj, a pupil wears her new LOUTCH glasses

Clipped, adjusted, worn.

Each pre-cut lens clips straight into the frame using the wooden jig. Lock the bridge width, clip on the temples, and the LOUTCH pair is ready in under two minutes. Every part is interchangeable.

5parts
0screws
< 2minutes

Every correction

Myopia, hyperopia and astigmatism: −6 to +6 sphere, up to 1.50 cylinder, axis set to the degree.

Assembled on site

No tools, no lab: the technician assembles the pair in front of the person, with their lenses.

Fits everyone

The bridge adjusts to 18 or 21 mm: the same frame fits children and adults.

Tough, repairable

Injection-moulded polyamide 66. A lost part is replaced on its own, which extends the life of the pair.

The only humanitarian frame that corrects astigmatism to the degree.

3D view

Get a feel
for it.

See its five parts, then assemble it, turn it, adjust the bridge or fold it.

↔ Once in 3D, drag to rotate See how the glasses are assembled
A 3D view of the LOUTCH frame you can rotate
2 · The kit

Two cases,
one workshop.

Everything needed to fit 500 people travels in two stacked cases.

The two LOUTCH cases stacked and closed on the beach at Mar Lodj
The frame case open: four compartments, one family of parts each
The lens foam boards laid on a table, ready for the work station

Making glasses right in the field.

One case for the frame parts, one for the lenses sorted by correction, plus the assembly jig. They lock onto each other to travel, then become an optical assembly workshop anywhere.

500frames
1,600lenses
2cases

One parcel

Stacked and locked by their clips: 796 × 296 mm, one handle. In a hold, on a dirt road or in a pirogue.

One slot per part

Temples, right and left half-fronts: each family of parts has its own compartment to make the technician's work easier.

A station in 2 minutes

Take the foam boards out of the case and lay them on the table: everything is ready, no tools, no electricity.

Refillable

After each mission, the cases are restocked with the lenses used and the parts needed.

How the lenses are stored

Cylinder first, then sphere.

One foam board per cylinder: you pick the right board first. Inside, lenses are sorted by sphere, from −6 to +6 dioptres in 0.25 steps. The technician finds the prescribed lens in seconds.

Close-up of LOUTCH lenses in the foam, with the cylinder label 1 board = 1 cylinder Columns = sphere, −6 to +6
3D view

Walk around
the station.

Rotate the station, then pack the kit away or set it up in one click.

↔ Once in 3D, drag to rotate See the kit set-up in detail
A 3D view of the LOUTCH station set up: both cases open and the lens boards on the table